KIT PULSE AIO.5 80W FROSTED VANDY VAPE
Vandy Vape está de volta com um kit personalizável: o kit Pulse Aio.5. Este novo cigarro eletrônico, com dimensões de 97,5 x 55,6 x 28,2 mm, é composto por painéis e botão intercambiável. Além de sua aparência personalizável, o Pulse Aio 5 chega a 80 W de potência e possui uma autonomia significativa graças à sua compatibilidade com uma bateria em 18650, ou em 20700 ou em 21700 (não fornecida). Para a autonomia em e-líquido, o kit oferece um atomizador reconstruível com capacidade de 3,7 ml ou um atomizador clássico de 5 ml.
In terms of capacity, this new kit from Vandy Vape starts at 5W to rise to 80W of power. The chipset offers 5 modes of operation to enjoy the power of this Pulse Aio.5 : Wattage / TC / Voltage / Bypass and Smart Mode.
All this is made possible by a battery. This last one can be in 21700, in 20700 or in 18650 thanks to the adapter provided in the purchase kit of this Pulse Aio.5. The battery chosen can be recharged by USB-C cable (supplied). The port is just below the selection buttons.
To access this USB Type-C port, you have to remove the right panel of the kit. Under this panel, it is possible to access the selection buttons as well as a small screen to know the power used, the mode used and the remaining autonomy. Finally, it is possible to wait for the battery to be removed and replaced or recharged. Under the left panel, it is possible to access the cartridge for filling in e-liquid.
Vandy vape offers the choice to enjoy its vape experience. Indeed, the brand offers two different cartridges in its purchase kit. There is a Pulse Vessel RBA cartridge and a Pulse Vessel Pre-Built cartridge. The first is RBA, it is a rebuildable cartridge with a tray able to accommodate a coil. This cartridge is therefore intended for expert vapoteurs, vapoteurs DIY.
For vapers a little less intrepid, Vandy Vape offers simplicity with the Pulse Vessel Pre-Built cartridge. It is larger than the Pulse Vessel RBA (3.7 ml capacity against 5ml) and is compatible with all VVC coils from Vandy Vape. With the purchase of the kit, are provided two VVC coilsand two coil pre-made 24ga Ni80 of 0.4ohm.
To proceed with the filling of the two cartridges, simply unclip the tab on the side of the cartridge.
1x Pulse AIO.5
1x Pulse Vessel RBA cartridge
1x Pulse Vessel Pre-Built cartridge
1x Tank release tool
1x Coil Template
1x 18650 Adapter
1x Set of 2 doors
2x Pre-made 0.4Ω Coils
2x VVC resistors
1x USB-C cable
1x Kit of screws, seals and replacement parts
|Device type||Kits & Packs|
|Kit type||Regulated boxs kits|
|External battery type||1 battery|
|Battery Type||18650 / 20700 / 21700 (not included)|
|Micro USB||Charging and update|
|Capacity (ml)||3,7 ml, 5 ml|
|Drip tip type||510|
|Coils||Less than 0.5 ohm|